Product Information
  Common Rail Valve
     ⑴ 334 Valve Cap 6.6$    
     ⑵ 110 Series 8$    
     ⑶ 120 Series 8.8$    
  Common Rail System
  New Products
  Unit Injector
  Remanufacture
  Solenoid
  AMBAC Series
  VE pump
  Delphi-Lucas
  Stanadyne
  Caterpillar
  VP Series
  HEUI Injector
  Nozzle Holders
  Cummins
  Detroit
  Yanmar
  Unit Pump
  Electronic Control
  Plunger
  Nozzle
  Delivery Valve
  Engine chart
  Repair Kit & Tool
  Gas-injection
  Turbo
  Standard Injector
  Common Rail CRS200A
  Processing Equipment
  Electronic Pump
     
  eBay StoreseBay Stores  
     
  amazon Storesamazon Stores  
www.chinahanji.com
 

HOME >> Gas-injection >> Hose to Fuel Rail

 
K-Jectronic 14mm-14mm Hose to Fuel Rail Side Feed
Nippon Denso Mazda Rx-7 Other Products  
 
 
 
Picture CC lbs/hr hp Impedence Price
240 23 48 Low $USD 60.88
These are great injectors that flow about 15% more than the standard RB30 but not quite as much as the RB30 Turbo. A great upgrade for your VL or Nissan Skyline.
Picture CC lbs/hr hp Impedence Price
260 25 52 Low $USD 60.88
These injectors come out standard (Australian applications) in VL Turbo's.
Picture CC lbs/hr hp Impedence Price
260 25 52 High $USD 106.55
These are genuine BOSCH injectors and they are for the Nissan Exa CA18 1.8lt. They are high impedance and will also work in VL Turbo's.
Conversion Kits
We offer conversion kits for the models listed below because it is easier and cheaper than finding injectors of this style that flow at higher rates than standard. The conversion kits come with a fuel rail, mounting brackets and easy to read fitting instructions. They will enable you to fit any 14mm-14mm o-ring injector, all the way up to 1600cc and are guaranteed to fit straight on with no modifications.
Picture Make Engine Price
Holden RB30 3.0lt, VL Commodore $USD 182.65
The cheapest & easiest way to upgrade your RB30 injectors is to change your fuel rail to accept 14mm o-ring style injectors (instead of hose type). Slap one of these rails in and it will enable you to easily upgrade any time you want!
Picture Make Engine Price
Holden RB30 3.0lt, VL Commodore Turbo $USD 182.65
The cheapest & easiest way to upgrade your RB30 Turbo injectors is to change your fuel rail to accept 14mm o-ring style injectors (instead of hose type). Slap one of these rails in and it will enable you to easily upgrade any time you want!
Picture Make Engine Price
Nissan RB30 3.0lt Skyline $USD 182.65
The cheapest & easiest way to upgrade your RB30 injectors is to change your fuel rail to accept 14mm o-ring style injectors (instead of hose type). Slap one of these rails in and it will enable you to easily upgrade any time you want!
Picture Make Engine Price
Nissan Z31 300ZX Twin hose injector $USD 182.65
If you have ever had trouble with your twin hose Z31 injectors leaking or you wanted to upgrade your injectors at the right price... this is the answer.
 
 
English China Español Русско Portuguese العربية Nederlands Français Deutsch Ελληνικά Italiano 日本語
闽ICP备14013449号-2
E-mail:sales4@vepump.com Fax:+86-594-3600560
CopyRight©2003 ChinahanJi Power Co.,Ltd All rights reserved
   
Chinahanji Power Co.,Ltd is a manufacturer specialist in diesel engine parts.Our major products are Ve Pump,diesel injection parts, diesel nozzle,diesel fuel injection system,and the interrelated products (such as Head Rotor,Feed Pump ,Cam Plate, Drive Shaft , Magnet Valve , etc.),Diesel Plunger(A ,AS,P,PS7100,P8500,MW type, etc.) ,Diesel Nozzle (Dn,DNOPDN,S,SN,PN and so on.),Delivery Valve,Cat Pencil Injectors and so on.